Hunting for the best wood coating hardener can be a little bit confusing since there are so many products out there. We at Dongxu are of the opinion that the right hardener for your work will be the one that perfectly suits your needs. Actually, there are various types of hardeners like epoxy and polyurethane, to name a few. For example, epoxies are very tough and they can even get into the tiniest cracks leaving the wood surface very smooth which is great for the furniture or articles you will be frequently using
Polyurethane hardeners, however, are also very durable but in most cases, they dry faster which is a handy feature if you need to quickly finish your project, the third alternative could be water, based hardeners which are very easy to clean and have less odor. First and foremost, think about the type of wood you have and the place where your wooden piece is going to be located in order to decide on a suitable hardener. For example, if it is a wood piece that will be outdoors, then the hardener should be one that is waterproof. Dongxu's Water Based Isocyanate Hardener have been subjected to the most rigorous tests so they can endure the harshest environments therefore the wood is undoubtedly being safeguarded.
Choosing the best wood paint hardener for the job can truly be a major factor. First and foremost, consider the size of your artwork and the kind of wood you have for the project. You might be surprised that not all hardwood paint hardeners are alike: perhaps if you are doing a simple craft or hobby, you would mostly want the fast drying hardener; nevertheless, medium to large scale works will require a product that hardens slowly for the utmost strength. Furthermore, the wood's environment will also be a big factor. Will it be inside or outside? If it is for the garden, you will need a product that is resistant to rain and sun
Before using Dongxu products, please make sure to carefully go through the warning instructions. And these are almost always loaded with helpful tips on how to mix and apply the exterior wood hardener. You can mix too little or too much, which will change the hardener's working. Also, think about the appearance you want. Are you after a shiny or a dull one? Various hardeners provide different finishes. In the end, as always, test your hardener on a piece of wood first.
Things you should consider to get the maximum benefit out of wood coating hardeners. First and foremost, you can readily use it. Actually, an overindulgence in it might cause the traders to limp. The scientific explanation is pretty clear. In fact, a good start would be to prepare the wood surface thoroughly before anything else. That is, you have to sand it down until it feels smooth
If there is some old paint or stain remaining on the wood, you should remove it first. In addition, washing the wood will also facilitate the hardener to stick the wood surface better. When the surface is ready, only then can you proceed to apply Dongxu hardener on it.
It's not easy to select the correct wood coating hardener for various kinds of wood and nevertheless, it is a vital step if you want to achieve the best result. Different types of wood have different textures, porosities, and colors, so they react differently to hardeners. For softwoods like pine, a fast, drying hardener is more appropriate because it can absorb the liquid quickly. Donggu has a proprietary product, a softwood clear coat hardener for wood that penetrates deeply and toughens the surface.
However, hardwoods like oak or maple are much denser and may require a different treatment. For these types of wood, most likely a thicker hardener is what you will want to use. The main point is that a thicker hardener will stay on the surface longer and form a good protective layer even without being related to waterproofing. Dongxu provides special formulas that are ideal for hardwoods so that you can protect them properly.
EN
